JTM35DH
Description：
1、24V DC permanent magnet motor
2、Thrust up to 6000 N in push and up to 4000 N in pull
3、Color: grey or black
4、Standard protection class: IP43
5、Aluminium-Alloy outer tube and inner tube, beautiful and corrosion resistant
6、Low noise; The average noise level is lower than 48dB (ambient noise is less than 40dB).
7、Built-in electronic limit switches
8、High-strength front and back fixtures
9、The actuator can go up or down by crank after the power if off
10、Certificate : CE
Specifications：
Dynamic Load Push(N) | 6000 | 4000 | |
Dynamic Load Pull(N) | 4000 | 4000 | |
Static Load Push*(N) | 5000 | 3500 | |
Static Load Pull*(N) | 4000 | 3500 | |
Input（VDC） | 24/12 | ||
Speed at Full Load(mm/s) | 3 | 4 | |
Stroke Length（mm） | 50~400 | 50~250 | |
Mounting position | H type、V type | ||
Color | Black or Grey | ||
Limit Switch | Build-in | ||
Overload Protection | Yes | ||
Duty Cycle | 10%. max 2min. continuous use | ||
IP Grade | IP43 | ||
Operating Temperature | +5℃ ~ +40℃ | ||
Standard | CE / UL60601 | ||
