Topmedi Linear Actuator TMMD60

Description

TMMD60 is a quiet and powerful actuator up to 6000N thrust, designed for use in a variety of medical and home care applications such as patient hoist and bed.

Technical information

· Input voltage: 24V DC

· Max. load: 6000N (push) / 4000N (pull)

· Typical speed at no load: 23 mm/sec

· Typical speed at full load: 5.0 mm/sec (6000N load)

· Stroke: 50 ~ 400mm

· Noise level: ≦53dB

· IP Level: IPX4, IPX6

· Rear connector’s pivot orientation can be chosen in every 30 degrees.

· Preset limit switches

· Aluminum outer tube

· Steel extension tube

· Color: Light gray RAL 7035

· Duty cycle: 10% and max. 2 min. continuous operation in 20 min.

· Ambient operation temperature: +5°C ~ +40°C

· Certified: CE Marking, MDD Directive 93/42/EEC

· RoHS Compliance

Option

· Positioning signal feedback with Hall effect sensor x 1

· Positioning signal feedback with Hall effect sensor x 2

· Mechanical push only extension tube

· Safety nut (in push direction)

· IP Level: IPX6

· QR1 quick release. Only go with motor and spindle code A8 or AC. And the loading conditions are shown in the table below for QR1 operation.

· QR2 quick release: To retract actuator quickly by pinching the QR2 grip while emergency

· MR3 manual release: To retract actuator slowly and put down the patient safely by turning the MR3 knob with hand when losing power in the application of patient hoist