8 points to pay attention to when buying a wheelchair

1. Wheel touchdown. When the user walks independently, no matter pressing a small stone or crossing a small ridge, other wheels will not be suspended, forming a tendency to lose control or sudden steering.

2. The width, length and height of the seat, the height of the backrest and the height of the armrest shall be suitable for themselves, and there shall be a cushion to prevent bedsore. 3. Standing wave function. When the nursing staff push the patient to the slope, brake the brake, and leave, the wheelchair cannot slide or roll over.

4. Minimum turning radius. 360 degree bidirectional change shall be made on the horizontal test surface, which shall not be greater than 0.85m.

5. Minimum commutation width. The minimum channel width that can reverse the wheelchair 180 degrees in one advance shall not be greater than 1.5m.

6. Statement stability. When the user wants to climb the ramp or drive across the ramp independently, he can't lower his head and overturn. He may overturn laterally if he buckles his head.

7. Other auxiliary parts, such as shockproof installation, arm support and wheelchair table, etc.

8. Sliding offset. Deviation means that the equipment is unbalanced, and the inclination value from the zero line in the inspection track of 2.5 degrees shall be less than 35 cm.

When buying a wheelchair, you can pay attention to the above eight o'clock to buy a good wheelchair.