News

Installation and adjustment of wheelchair pedal

2022-12-20handler1220

If the seat of the electric wheelchair is too high or the pedal is too low, the lower limbs will lose support, the lower limbs will be suspended, and the body cannot maintain balance. On the contrary, when the seat is too high, the wheelchair armrest cannot be pushed under the table; The whole weight makes the patient uncomfortable. Now, Foshan wheelchair manufacturer will briefly introduce the installation and adjustment of the electric wheelchair pedal.

The height of the seat is consistent with the height of the pedal: if the seat is high, the pedal is relatively low, and vice versa. Under normal circumstances, when the patient is sitting in a wheelchair and the lower limbs are placed on the footstool, the distance from the heel to the rouge socket increases by 4cm, or the front 1/3 of the thigh and calf is about 4cm higher than the footstool. The edge of the front cushion. This is a wheelchair. Expected seat height. The pedal surface shall be at least 5cm above the ground.

Pedal disassembly: Loosen and remove the nut at the connection between the foot and the frame tube, and then pull out the pedal assembly.

Foot pedal installation: put the original foot pedal into the frame tube, push it into place, and then tighten the screws.

Adjust the pedal height: Use the wrench in the product kit to loosen the screws and nuts, adjust the height according to the length of the user's foot, and tighten the screws. Note that the end of the screw must be on the inside and locked from the inside out.


TOPMEDI Co., Ltd. is a professional medical supplier with the ambition to be one of the best and the key rehabilitation equipments supliers in China. Our main products include Electric Wheelchair, Sports Wheelchair, Brain Paralysis Wheelchair, Hospital Bed, Walking Aids,Shower Chair and Commode. Our wheelchair factory is a leading manufacturer of wheelchair and rehabilitation equipments in China. The workshop covers an area of 30,000 squarer meters,with the annual production capacity of 500,000 wheelchairs, 2000,000 walking aids, and 10,000 hospital beds. TOPMEDI products have been well accepted in 80 countries and regions, mainly Australia, America, Europe, Middle East and Asia, covering both high end and middle end market,and enjoy high reputation among customers. TOPMEDI would like to join hands with our partners all around the world for our promising future!